Show simple item record

dc.contributor.advisorLoov, Robert E.
dc.contributor.authorWeerasekera, Ilisha Ruwan Abeyratne
dc.date.accessioned2005-07-27T23:31:44Z
dc.date.available2005-07-27T23:31:44Z
dc.date.issued1991
dc.identifier.citationWeerasekera, I. R. (1991). Transfer and flexural bond in pretensioned prestressed concrete (Unpublished doctoral thesis). University of Calgary, Calgary, AB. doi:10.11575/PRISM/17694en_US
dc.identifier.isbn0315710985en
dc.identifier.urihttp://hdl.handle.net/1880/24503
dc.descriptionBibliography: p. 292-297.en
dc.description.abstractIn recent times large strands (13, 15 and 16 mm in diameter) have become increasingly popular in the pretensioned prestressed concrete industry and have found wide applications in varying geometries of sections. However use of such elements and their behaviour in several situations have been questioned with respect to anchoring of these strands in concrete; which is accomplished by bond. The experimental results available on bond are limited and information relating to large strands is rare. Laboratory investigations were conducted to determine the influence of some of the inadequately examined parameters on transfer and flexural bond. The principal variables considered were strand size, concrete strength, beam width, clear side cover and bottom cover. The specimens were specifically designed for the purpose of modeling the above parameters. The experimental program consisted of fabricating and testing thirteen full scale beam specimens. Results of these beam tests are presented. The experimental results show that concrete strains in the anchorage region display three different types of prestress-build-up profiles. The curves range from concave, to linear and to convex in the prime portion of the transfer length, exhibiting the significance of the concrete stiffness around the tendon. A definite indication has been observed that concrete strength, strand diameter, cover and effective beam width influence transfer lengths . The information collected during flexural bond tests disclosed the influence of strand size, concrete cover, concrete strength and loading on flexural bond performance in a qualitative sense. Beams that failed in bond-shear and bond-flexure show the dangers associated with bond failures. Beams that failed in shear or flexure indicated the availability of additional bond capacity. During the analysis of the test data the need for a theoretical basis for bond development was realised. Therefore the scope of the research was extended to explore this. The theories hitherto proposed have neither been convincing nor successful in predicting bond development. The absence of a valid theory to complement experiments has stifled the search for solutions to the bond problem. Recognition of the importance of concrete strength and cover properties has strengthened the notion that bond development is primarily a function of the material and geometrical properties of concrete and prestressing steel. A theory has been developed using principles of solid mechanics incorporating these variables. A preliminary analysis using linear elastic theory revealed stresses in concrete which far exceeded its tensile strength. Clearly concrete must crack during the bond development process. The procedure adopted recognises the presence of a disturbed zone around the strand. The concrete in the affected region is analysed as an anisotropic elastic material. The existence of radial cracks has been confirmed by a microscopic examination of a small specimen. A computer program based on the theory put forward is developed to determine the bond stress distribution, concrete strain profiles , end slip, transfer length and the degree of cracking. The important variables have been identified as concrete cover around the tendon, concrete strength, tendon size, initial level of prestress in steel, level of concrete stress and surface form of the tendon. For the purpose of design, an empirical equation has been developed which fits the results calculated using the detailed procedure.
dc.format.extentxx, 322 leaves : 30 cm.en
dc.language.isoeng
dc.rightsUniversity of Calgary graduate students retain copyright ownership and moral rights for their thesis. You may use this material in any way that is permitted by the Copyright Act or through licensing that has been assigned to the document. For uses that are not allowable under copyright legislation or licensing, you are required to seek permission.
dc.subject.lccTK 439 W43 1991en
dc.subject.lcshPrestressed concrete
dc.titleTransfer and flexural bond in pretensioned prestressed concrete
dc.typedoctoral thesis
dc.publisher.institutionUniversity of Calgaryen
dc.identifier.doihttp://dx.doi.org/10.11575/PRISM/17694
thesis.degree.nameDoctor of Philosophy
thesis.degree.namePhD
thesis.degree.disciplineCivil Engineering
thesis.degree.grantorUniversity of Calgary
dc.identifier.lccTK 439 W43 1991en
dc.publisher.placeCalgaryen
ucalgary.thesis.notesoffsiteen
ucalgary.thesis.uarcreleaseyen
ucalgary.item.requestcopytrue
ucalgary.thesis.accessionTheses Collection 58.002:Box 804 520535179


Files in this item

Thumbnail
Embargoed until: 2200-01-01

This item appears in the following Collection(s)

Show simple item record

University of Calgary graduate students retain copyright ownership and moral rights for their thesis. You may use this material in any way that is permitted by the Copyright Act or through licensing that has been assigned to the document. For uses that are not allowable under copyright legislation or licensing, you are required to seek permission.