Show simple item record

dc.contributor.advisorSvrcek, William Y.
dc.contributor.authorFerworn, Kevin Alan
dc.date.accessioned2005-07-29T22:15:27Z
dc.date.available2005-07-29T22:15:27Z
dc.date.issued1995
dc.identifier.citationFerworn, K. A. (1995). Thermodynamic and kinetic modelling of asphaltene precipitation from heavy oils and bitumens (Unpublished doctoral thesis). University of Calgary, Calgary, AB. doi:10.11575/PRISM/16583en_US
dc.identifier.isbn0612031004en
dc.identifier.urihttp://hdl.handle.net/1880/29911
dc.descriptionBibliography: p. 201-210.en
dc.description.abstractWith the increasing use of bitumens as fuels and chemical feedstocks, it is important to understand how bitumens behave under production and processing conditions. Due to their high viscosity, bitumens cannot be produced by conventional means, necessitating the use of more sophisticated thermal or solvent recovery techniques. It has been observed, however, that the diluents used in the petroleum industry can cause asphaltene deposition from bitumens. A scanning laser particle analyzer is employed to study how asphaltenes are affected by different solvents, thermodynamic conditions and external factors including agitation, shearing and excess oxygen. It was determined that asphaltene particles form extremely quickly, are very stable, and are affected to certain extents by different solvents in varying concentrations. A microvideo camera was also used to view the asphaltene particles and it was discovered that they are not necessarily spherical in nature.
dc.format.extentxviii, 236 leaves ; 30 cm.en
dc.language.isoeng
dc.rightsUniversity of Calgary graduate students retain copyright ownership and moral rights for their thesis. You may use this material in any way that is permitted by the Copyright Act or through licensing that has been assigned to the document. For uses that are not allowable under copyright legislation or licensing, you are required to seek permission.
dc.subject.lccTN 871 F456 1995en
dc.subject.lcshThermal oil recovery - Mathematical models
dc.subject.lcshBitumen
dc.subject.lcshAsphaltene
dc.titleThermodynamic and kinetic modelling of asphaltene precipitation from heavy oils and bitumens
dc.typedoctoral thesis
dc.publisher.institutionUniversity of Calgaryen
dc.identifier.doihttp://dx.doi.org/10.11575/PRISM/16583
thesis.degree.nameDoctor of Philosophy
thesis.degree.namePhD
thesis.degree.disciplineChemical and Petroleum Engineering
thesis.degree.grantorUniversity of Calgary
dc.identifier.lccTN 871 F456 1995en
dc.publisher.placeCalgaryen
ucalgary.thesis.notesoffsiteen
ucalgary.thesis.uarcreleaseyen
ucalgary.item.requestcopytrue
ucalgary.thesis.accessionTheses Collection 58.002:Box 972 520538282


Files in this item

Thumbnail
Embargoed until: 2200-01-01

This item appears in the following Collection(s)

Show simple item record

University of Calgary graduate students retain copyright ownership and moral rights for their thesis. You may use this material in any way that is permitted by the Copyright Act or through licensing that has been assigned to the document. For uses that are not allowable under copyright legislation or licensing, you are required to seek permission.