Tailoring Perovskite- and Fluorite-Type Oxides for Solid Oxide Fuel Cells (SOFCs)

Simple item page
atmire.migration.oldid4348
dc.contributor.advisorThangadurai, Venkataraman
dc.contributor.authorSingh, Kalpana
dc.contributor.committeememberBirss, Viola
dc.contributor.committeememberShimizu, George
dc.contributor.committeememberCheng, Frank
dc.contributor.committeememberKesler, Olivera
dc.date.accessioned2016-05-06T14:58:18Z
dc.date.available2016-05-06T14:58:18Z
dc.date.issued2016
dc.date.submitted2016en
dc.description.abstractA solid oxide fuel cell (SOFC) is a high temperature solid state energy conversion device that directly converts the chemical energy of fuels into electrical energy at high efficiency. The objective of thesis is to develop and tune fluorite- and perovskite-type metal oxides that serve as alternate anodes, electrolytes, and cathodes for intermediate temperature SOFCs. Here, the chemical reactivity between a fluorite-based Ce0.7RE0.2Mo0.1O2 (RE = Y, Sm) anode and 8 mol% yttria-stabilized zirconia electrolyte was evaluated at 1000 ºC. The electrical conductivity of the reaction product Ce1-x-y-zRExZrYMozO2 in air and wet H2 was found to be lower than that of Ce0.7RE0.2Mo0.1O2, due to the formation of defect associates and a decrease in concentration of charge carriers. The effect of A-and B-site co-doping on the chemical and electrical properties of potential perovskite-type Ba0.5Sr0.5Ce1-x-y-zZrxGdyYzO3-δ (0 < x < 0.5; y = 0, 0.1, 0.15; z = 0.1, 0.2) proton conducting electrolyte was evaluated. Excellent chemical stability under water vapor for 24 h at 90 ºC was observed for all compositions. The electrical conductivity measurements under dry and humid atmospheres revealed the proton conductivity in these oxides. Among the samples investigated, Ba0.5Sr0.5Ce0.6Zr0.2Gd0.1Y0.1O3-δ showed the highest proton conductivity of 10-3 S/cm at 600 ºC in humid air and H2. The effect of sintering temperature on the proton dynamics of Ba0.5Sr0.5Ce0.6Zr0.2Gd0.1Y0.1O3-δ was evaluated by establishing a correlation between the grain boundary space charge effect, electrical conductivity, and dielectric loss of the samples sintered at 1300, 1400, and 1550 ºC. The proton dynamics in local motion and long-range motion appears to be different due to the difference seen in the relaxation time and activation energy of protons in local motion and bulk conduction properties. Furthermore, the electrochemical performance of the layered perovskite-type Gd0.5Pr0.5BaCo2O5+δ and Ba0.5Sr0.5Ce0.6Zr0.2Gd0.1Y0.1O3-δ composite cathode, and Ni and Ba0.5Sr0.5Ce0.6Zr0.2Gd0.1Y0.1O3-δ composite anode for proton conducting SOFCs was evaluated through symmetrical cell studies. The symmetrical cell of Gd0.5Pr0.5BaCo2O5+δ-Ba0.5Sr0.5Ce0.6Zr0.2Gd0.1Y0.1O3-δ composite cathode showed an area specific polarization resistance of 2.4 and 1.9 Ω.cm2 at 700 ºC for oxygen reduction reaction in the air and wet air, respectively, and exhibited an activation energy of 1.2 eV in both atmospheres.en_US
dc.identifier.citationSingh, K. (2016). Tailoring Perovskite- and Fluorite-Type Oxides for Solid Oxide Fuel Cells (SOFCs) (Doctoral thesis, University of Calgary, Calgary, Canada). Retrieved from https://prism.ucalgary.ca. doi:10.11575/PRISM/27971en_US
dc.identifier.doihttp://dx.doi.org/10.11575/PRISM/27971
dc.identifier.urihttp://hdl.handle.net/11023/2986
dc.language.isoeng
dc.publisher.facultyGraduate Studies
dc.publisher.institutionUniversity of Calgaryen
dc.publisher.placeCalgaryen
dc.rightsUniversity of Calgary graduate students retain copyright ownership and moral rights for their thesis. You may use this material in any way that is permitted by the Copyright Act or through licensing that has been assigned to the document. For uses that are not allowable under copyright legislation or licensing, you are required to seek permission.
dc.subjectEducation--Physical
dc.subjectEducation--Sciences
dc.subjectAnthropology--Physical
dc.subjectEnergy
dc.subject.classificationSolid Oxide Fuel Cell, Perovskites, Fluoritesen_US
dc.titleTailoring Perovskite- and Fluorite-Type Oxides for Solid Oxide Fuel Cells (SOFCs)
dc.typedoctoral thesis
thesis.degree.disciplineChemistry
thesis.degree.grantorUniversity of Calgary
thesis.degree.nameDoctor of Philosophy (PhD)
ucalgary.item.requestcopytrue
Files
Collections
Open Theses and Dissertations