Experimental study of granular material behaviour and microstructure in a photoelastic disk assembly

Simple item page
dc.contributor.advisorWan, Richard G.
dc.contributor.authorAl-Mamun, Mohammad Abul Monsur
dc.date.accessioned2005-08-16T16:54:19Z
dc.date.available2005-08-16T16:54:19Z
dc.date.issued2004
dc.descriptionBibliography: p. 202-208en
dc.description.abstractIn this thesis, both micro and macro mechanical studies were conducted on an ide­alized granular assembly under different kinematic and static conditions. The ex­perimental approach involved the use of an analogue granular material composed of an assembly of photoelastic disks in order to permit the visualization of force transmission networks through fringe analysis. A comprehensive 2-D biaxial testing apparatus was developed along with four high precision actuators that can load a specimen consisting of an assembly of photoelastic disks in either stress or strain control mode. Two different disk cross-sections were used: namely pentagonal and circular, while between 200 and 400 disks were used to constitute a specimen of approximately 100 mm x 100 mm in size. A series of tests was conducted along proportional strain paths so that the spec­imen responses in the complete forced compression and dilation regimes could be explored. The specimens were sheared under different static and kinematic condi­tions with a special focus on the dilation regime, given its importance in granular mechanics. Initially, tests were conducted on isotropically consolidated specimens of pentagonal disks to observe typical force-displacement responses as well as force re­sponse paths. Microstructural features such as force transmission and its evolution were studied through image analysis and photoelasticity. In particular, a micro-mechanical description of the deformational processes that occur during the 'static liquefaction' of a specimen under forced dilation was established. Furthermore, strain probing tests were conducted on a specimen at the same amount of preshearing, but with different stress histories. It was found that stress history effects tend to fade away with increasing levels of straining. The effect of intergranular friction was also investigated, and it was found that it only plays a role towards providing the stability of fabric, once the latter is formed. In order to study the constitutive nature of the granular assembly, force response envelopes were determined at different probing strain levels. Both the shape and orientation of the force response envelopes elucidated the effect of pre shearing stress history as well as probing strain level on the material behaviour. Furthermore, a series of force probing tests was conducted on the same above-mentioned specimens so that the strain response envelopes could be determined at different probing force levels. Both the force and strain response envelopes gave identical behaviours in terms of the material response as a function of fabric and its evolution. One of the important findings that emerged from the force probing tests is that a plastic flow rule was established, and hence confirmed the applicability of the theory of plasticity in the modelling of granular materials. A material stability analysis was also performed on the proportional strain path test results by using Hill's criterion for the sign of the second order work. The threshold dilation rates at which instability occurs were determined for specimens subjected to different initial confinements. In some cases, material softening was ob­served before material instability had occurred. The amount of dilation and dilation rates that the material can sustain before instability was investigated for different initial confinements. The strain probing tests were further performed with circular disks in order to study the effect of kinematic constraints imposed by disk cross section and diameter on material behaviour under forced dilation. For the same initial confinement and strain path, significant differences were observed in the specimen strength as the disk cross section and diameter were changed. The microscopic force transmission and its evolution in the specimen were presented from the photoelastic observation of pictures taken at different characteristic points of loading history in order to explain the salient failure mechanisms.en
dc.format.extentxx, 225 leaves : ill. ; 30 cm.en
dc.identifier.citationAl-Mamun, M. A. (2004). Experimental study of granular material behaviour and microstructure in a photoelastic disk assembly (Master's thesis, University of Calgary, Calgary, Canada). Retrieved from https://prism.ucalgary.ca. doi:10.11575/PRISM/11976en_US
dc.identifier.doihttp://dx.doi.org/10.11575/PRISM/11976
dc.identifier.isbn0612975231en
dc.identifier.lccAC1 .T484 2004 A56en
dc.identifier.urihttp://hdl.handle.net/1880/41428
dc.language.isoeng
dc.publisher.institutionUniversity of Calgaryen
dc.publisher.placeCalgaryen
dc.rightsUniversity of Calgary graduate students retain copyright ownership and moral rights for their thesis. You may use this material in any way that is permitted by the Copyright Act or through licensing that has been assigned to the document. For uses that are not allowable under copyright legislation or licensing, you are required to seek permission.
dc.titleExperimental study of granular material behaviour and microstructure in a photoelastic disk assembly
dc.typemaster thesis
thesis.degree.disciplineCivil Engineering
thesis.degree.grantorUniversity of Calgary
thesis.degree.nameMaster of Science (MSc)
ucalgary.item.requestcopytrue
ucalgary.thesis.accessionTheses Collection 58.002:Box 1485 520492002
ucalgary.thesis.notesUARCen
ucalgary.thesis.uarcreleaseyen
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
2004_Al-Mamun.pdf
Size:
27.13 MB
Format:
Adobe Portable Document Format
Description:
Download
Collections
Legacy Theses