Chemical modification of petroleum coke and applications of derived materials

dc.contributor.advisorHill, Josephine M.
dc.contributor.authorHuang, Qing
dc.contributor.committeememberLu, Qingye
dc.contributor.committeememberPonnurangam, Sathish
dc.date2021-06
dc.date.accessioned2021-05-14T18:50:48Z
dc.date.available2021-05-14T18:50:48Z
dc.date.issued2021-05-07
dc.description.abstractPetroleum coke (petcoke) is a by-product from the oil industry and is a solid product mainly composed of carbon (> 80 wt%) with some impurities. These impurities, in particular sulfur, limit petcoke as feedstock for the application-like fuel. The aim of this thesis was to explore the possible application of petcoke without activation procedure, which took advantage of the highly aromatic structure and high sulfur content (6.5 wt%) of petcoke. Petcoke was used as a precursor for preparing solid acid catalysts through direct functionalization (i.e., without an activation step) with nitric acid to access the inherent sulfur. For comparison, catalysts were also prepared using sulfuric acid and a mixture of nitric and sulfuric acid (1:3 vol ratio). Although compared to the sulfonated petcoke, nitric acid-treated petcoke showed higher strong acidity, the ester yield was lower than that of sulfonated petcoke. The effect of acid treatment conditions and ball milling pretreatment on the nitric acid-treated solid acid catalysts were investigated. Higher treatment temperature resulted in higher total acidity but did not increase the amount of sulfonic acid groups. The acidity increased with the increase of the treatment time and remained stable after 6 hours. However, the yield of the product is not only related to the number of sulfonic groups but shows a negative correlation with total acidity/oxygen-containing functional groups implying the adsorption effect of oxygen-containing functional groups might hinder the esterification reaction. With ball milling pretreatment, the defects and aromatic hydrogen of petcoke increased, which promoted the subsequent acid treatment to obtain more sulfonic acid groups. DFT calculations were used to analyze the pathways of sulfonic acid group formation, and the reaction pathway with NO2• was the most thermodynamically and kinetically preferable. The side product from the nitric acid treatment of petcoke was collected and it showed fluorescence characteristics and therefore was used to synthesis carbon dots-TiO2 photocatalysts, which improved the hydrogen production in the photocatalytic hydrogen generation reaction. The results in this thesis helped to explore the possible modifications and applications for using petcoke and taking advantage of its highly aromatic structure and high sulfur content.en_US
dc.identifier.citationHuang, Q. (2021). Chemical modification of petroleum coke and applications of derived materials (Doctoral thesis, University of Calgary, Calgary, Canada). Retrieved from https://prism.ucalgary.ca.en_US
dc.identifier.doihttp://dx.doi.org/10.11575/PRISM/38862
dc.identifier.urihttp://hdl.handle.net/1880/113408
dc.language.isoengen_US
dc.publisher.facultySchulich School of Engineeringen_US
dc.publisher.institutionUniversity of Calgaryen
dc.rightsUniversity of Calgary graduate students retain copyright ownership and moral rights for their thesis. You may use this material in any way that is permitted by the Copyright Act or through licensing that has been assigned to the document. For uses that are not allowable under copyright legislation or licensing, you are required to seek permission.en_US
dc.subject.classificationEngineering--Chemicalen_US
dc.titleChemical modification of petroleum coke and applications of derived materialsen_US
dc.typedoctoral thesisen_US
thesis.degree.disciplineEngineering – Chemical & Petroleumen_US
thesis.degree.grantorUniversity of Calgaryen_US
thesis.degree.nameDoctor of Philosophy (PhD)en_US
ucalgary.item.requestcopytrueen_US
Files
Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
ucalgary_2021_huang_qing.pdf
Size:
10.09 MB
Format:
Adobe Portable Document Format
Description:
License bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
license.txt
Size:
2.62 KB
Format:
Item-specific license agreed upon to submission
Description: