Multiphase flow analysis of Desanders Sand Separators
| dc.contributor.advisor | Wood, David H. | |
| dc.contributor.advisor | Morton, Chris R. | |
| dc.contributor.author | Basyouny, Ahmed | |
| dc.contributor.committeemember | Hugo, Ronald J. | |
| dc.contributor.committeemember | Johansen, Craig T. | |
| dc.contributor.committeemember | He, Jennifer | |
| dc.contributor.committeemember | Tachie, Mark Francis | |
| dc.date | 2020-06 | |
| dc.date.accessioned | 2020-05-15T15:10:47Z | |
| dc.date.available | 2020-05-15T15:10:47Z | |
| dc.date.issued | 2020-05-13 | |
| dc.description.abstract | Multiphase flows have been a significant problem in the oil and gas industry, with many recent reports of failures in industrial piping and equipment due to erosion either from long-term liquid impingements or solid particles. One of the most efficient horizontal sand separators is the product developed by Specialized Desanders Inc., which is called the “Horizontal Desander.” It is a gravity-based separator, and the associated multiphase flow physics has been investigated in this research. This study analyzes the phase separation by applying multiphase numerical analysis using Star CCM+ software. Experimental testing with the two-phase flow (air and water), and three-phase flow (air, water, and sand) were performed and compared to the numerical results. After confidence is established in the numerical model, a four-phase simulation was performed to analyze the sand distribution at different operating pressures. The Particle Image Velocimetry measurements applied to the two-phase experiment showed that the time-averaged, RMS of velocity fluctuations and the frequency analysis of the air-liquid interface are in an acceptable agreement with the simulation results. Both the experiment and the simulation results have shown that 99% of sand has settled within 54% of the Desander length. The four-phase simulations show that higher operating pressures reduce the liquid level, and this affects the velocity of phases inside the Desander. The velocity changes result in changes to the trajectory of sand particles, causing them to travel further downstream at higher operating pressure. Knowledge of the different phase interactions and behavior of multiphase flow is essential in developing and optimizing gravity separators. | en_US |
| dc.identifier.citation | Basyouny, A. (2020). Multiphase flow analysis of Desanders Sand Separators (Doctoral thesis, University of Calgary, Calgary, Canada). Retrieved from https://prism.ucalgary.ca. | en_US |
| dc.identifier.doi | http://dx.doi.org/10.11575/PRISM/37842 | |
| dc.identifier.uri | http://hdl.handle.net/1880/112055 | |
| dc.publisher.faculty | Schulich School of Engineering | en_US |
| dc.publisher.institution | University of Calgary | en |
| dc.rights | University of Calgary graduate students retain copyright ownership and moral rights for their thesis. You may use this material in any way that is permitted by the Copyright Act or through licensing that has been assigned to the document. For uses that are not allowable under copyright legislation or licensing, you are required to seek permission. | en_US |
| dc.subject | Multiphase flow | en_US |
| dc.subject | Sand Separation | en_US |
| dc.subject | Horizontal Separators | en_US |
| dc.subject.classification | Engineering | en_US |
| dc.subject.classification | Engineering--Mechanical | en_US |
| dc.subject.classification | Engineering--Petroleum | en_US |
| dc.title | Multiphase flow analysis of Desanders Sand Separators | en_US |
| dc.type | doctoral thesis | en_US |
| thesis.degree.discipline | Engineering – Mechanical & Manufacturing | en_US |
| thesis.degree.grantor | University of Calgary | en_US |
| thesis.degree.name | Doctor of Philosophy (PhD) | en_US |
| ucalgary.item.requestcopy | true | en_US |