Experimental Study of Imbibition Mechanisms in Heavy Oil Waterflooding Using Etched Glass Micromodel

Simple item page
atmire.migration.oldid349
dc.contributor.advisorKantzas, Apostolos
dc.contributor.authorMei, Songyi
dc.date.accessioned2012-10-03T21:49:04Z
dc.date.available2012-11-13T08:01:48Z
dc.date.issued2012-10-03
dc.date.submitted2012en
dc.description.abstractWaterflooding in heavy oil reservoirs has an almost 50 years history in western Canada, but its recovery mechanisms, especially in the situation of a high oil to water viscosity ratio, are still not well understood. This thesis studied the water imbibition mechanisms in the process of heavy oil waterflooding, and their effects on oil recovery using a glass made micromodel. In a water-wet environment, waterflooding (water displacing oil) represents a process of water imbibition. This water imbibition experimental study was conducted with varying water injection rates and oil viscosities. The effects of time, viscosity ratio and water injection rate on imbibition rate were studied. The recovery factor was proportional to the square root of time, and it also had a definite relationship with oil viscosity even though it was not linear. The effects of injection rate on imbibition rate were complicated. Images of the imbibition process were recorded and analyzed. Water broke through quickly because of water fingering. A significant amount of oil was produced during the post-breakthrough period under high water cuts. In the cases of low rate water injection, water imbibed into the original oil region perpendicularly to the water channel. At this stage, capillary forces were the key factor. Water film thickening, snap-off and oil refilling were the main mechanisms that made water imbibition work. Emulsification was also another important mechanism observed, with W/O emulsions primarily being formed.en_US
dc.identifier.citationMei, S. (2012). Experimental Study of Imbibition Mechanisms in Heavy Oil Waterflooding Using Etched Glass Micromodel (Master's thesis, University of Calgary, Calgary, Canada). Retrieved from https://prism.ucalgary.ca. doi:10.11575/PRISM/26069en_US
dc.identifier.doihttp://dx.doi.org/10.11575/PRISM/26069
dc.identifier.urihttp://hdl.handle.net/11023/296
dc.language.isoeng
dc.publisher.facultyGraduate Studies
dc.publisher.institutionUniversity of Calgaryen
dc.publisher.placeCalgaryen
dc.rightsUniversity of Calgary graduate students retain copyright ownership and moral rights for their thesis. You may use this material in any way that is permitted by the Copyright Act or through licensing that has been assigned to the document. For uses that are not allowable under copyright legislation or licensing, you are required to seek permission.
dc.subjectEngineering--Petroleum
dc.subject.classificationHeavy Oil Waterfloodingen_US
dc.subject.classificationImbibition Mechanismen_US
dc.subject.classificationMicromodelen_US
dc.titleExperimental Study of Imbibition Mechanisms in Heavy Oil Waterflooding Using Etched Glass Micromodel
dc.typemaster thesis
thesis.degree.disciplineChemical and Petroleum Engineering
thesis.degree.grantorUniversity of Calgary
thesis.degree.nameMaster of Science (MSc)
ucalgary.item.requestcopytrue
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
ucalgary_2012_mei_songyi.pdf
Size:
2.61 MB
Format:
Adobe Portable Document Format
Download
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
2.65 KB
Format:
Item-specific license agreed upon to submission
Description:
Download
Collections
Open Theses and Dissertations