Development of a Supersonic Reflected Shock Tunnel

Simple item page
atmire.migration.oldid5990
dc.contributor.advisorJohansen, Craig
dc.contributor.authorVan Harberden, Wesley
dc.contributor.committeememberRamirez-Serrano, Alex
dc.contributor.committeememberDu, Ke
dc.contributor.committeememberLangill, Phil
dc.date.accessioned2017-09-20T15:08:16Z
dc.date.available2017-09-20T15:08:16Z
dc.date.issued2017
dc.date.submitted2017en
dc.description.abstractA reflected shock tunnel capable of producing supersonic/hypersonic flows was developed. The facility as a whole is described and tested for purposes of calibration and demonstration. A method for producing diaphragms in-lab was developed, and demonstrated to produce diaphragms with good bursting characteristics. The manufacture of diaphragms was also calibrated for the purpose of aiding in future experiments using the shock tunnel. The reflected shock tube portion was tested for its ability to generate a high pressure, high temperature, reservoir gas, as required for achieving supersonic flow by means of nozzle expansion. The nozzle itself was tested by means of inserting a wedge to create an oblique shock wave, and confirmed to successfully achieve supersonic flow. Finally, the entire shock tunnel was tested and confirmed to be capable of reproducing a given set of test conditions with a high level of repeatability.en_US
dc.identifier.citationVan Harberden, W. (2017). Development of a Supersonic Reflected Shock Tunnel (Master's thesis, University of Calgary, Calgary, Canada). Retrieved from https://prism.ucalgary.ca. doi:10.11575/PRISM/25676en_US
dc.identifier.doihttp://dx.doi.org/10.11575/PRISM/25676
dc.identifier.urihttp://hdl.handle.net/11023/4108
dc.language.isoeng
dc.publisher.facultyGraduate Studies
dc.publisher.institutionUniversity of Calgaryen
dc.publisher.placeCalgaryen
dc.rightsUniversity of Calgary graduate students retain copyright ownership and moral rights for their thesis. You may use this material in any way that is permitted by the Copyright Act or through licensing that has been assigned to the document. For uses that are not allowable under copyright legislation or licensing, you are required to seek permission.
dc.subjectEngineering--Aerospace
dc.subjectEngineering--Mechanical
dc.subject.otherReflected Shock Tunnel
dc.subject.otherSupersonic
dc.subject.otherdesign
dc.subject.otherCalibration
dc.titleDevelopment of a Supersonic Reflected Shock Tunnel
dc.typemaster thesis
thesis.degree.disciplineMechanical and Manufacturing Engineering
thesis.degree.grantorUniversity of Calgary
thesis.degree.nameMaster of Science (MSc)
ucalgary.item.requestcopytrue
Files
Collections
Open Theses and Dissertations