Emulsion Injection for Enhancing the Fast-and Uniform SAGD Start-up Process

Simple item page
dc.contributor.advisorDong, Mingzhe
dc.contributor.authorYu, Long
dc.contributor.committeememberHassanzadeh, Hassan
dc.contributor.committeememberSarma, Helmanta Kumar
dc.contributor.committeememberHuang, Haiping
dc.contributor.committeememberBai, Baojun
dc.date2018-11
dc.date.accessioned2018-10-01T21:26:42Z
dc.date.available2018-10-01T21:26:42Z
dc.date.issued2018-09-10
dc.description.abstractThe start-up of Steam-Assisted Gravity Drainage (SAGD) process relies on months of non-productive steam circulation. A technology called Fast-and Uniform SAGD Start-up Enhancement (FUSE) has been developed to start up SAGD earlier using dilation mechanism. However, in some reservoirs there exist heterogeneities in inter-well zone along horizontal wells, which may cause uneven development of the dilation front, resulting in some low-mobility region un-swept. For the success of FUSE, it is crucial to temporarily block the high-mobility zones, so the injected fluid can penetrate into low permeability zones to form uniform dilation in the SAGD inter-well region. Using oil-in-water (O/W) emulsion as selective plugging agents seems a promising method due to the special advantages of controllable droplet size, non-permanent plugging, less formation damage of emulsion. In this work, to develop suitable oil-in-water emulsion systems, laboratory experiments and theoretical model were carefully designed. Emulsification tests were first conducted to screen suitable emulsifiers. Physicochemical properties of emulsion were characterized by stability, droplet size distribution, and rheological properties. Plugging behavior and conformance control performance of prepared emulsion were tested through sandpack flow experiments. Results show that O/W emulsion had good plugging performance when flowing in porous media with the largest sandpack permeability reductions greater than 99%. Interfacial tension significantly affects emulsion plugging behavior and conformance control ability. Emulsions with adequate interfacial tension possess favorable deformability and flexibility, which ensures they can alternately plug the heterogeneous sandpacks and obtain good conformance control performance. A new theoretical model, which incorporated physical properties of porous media, physicochemical properties of emulsion system, injection strategy and the interactions between porous media and emulsion, was developed to quantitatively describe the flow behaviors of emulsion in porous media. By appropriately choosing coefficients, the simulated results can have a well agreement to the experimental data. This work will greatly increase the understanding of emulsion flow in porous media, and provide technical guides for the optimization of the O/W emulsion injection in FUSE operation in oilfields.en_US
dc.identifier.citationYu, L. (2018). Emulsion Injection for Enhancing the Fast-and Uniform SAGD Start-up Process (Doctoral thesis, University of Calgary, Calgary, Canada). Retrieved from https://prism.ucalgary.ca. doi:10.11575/PRISM/33068en_US
dc.identifier.doihttp://dx.doi.org/10.11575/PRISM/33068
dc.identifier.urihttp://hdl.handle.net/1880/108715
dc.language.isoeng
dc.publisher.facultyGraduate Studies
dc.publisher.facultySchulich School of Engineering
dc.publisher.institutionUniversity of Calgaryen
dc.publisher.placeCalgaryen
dc.rightsUniversity of Calgary graduate students retain copyright ownership and moral rights for their thesis. You may use this material in any way that is permitted by the Copyright Act or through licensing that has been assigned to the document. For uses that are not allowable under copyright legislation or licensing, you are required to seek permission.
dc.subjectOil-in-water emulsion
dc.subjectplugging behavior
dc.subjectconformance control
dc.subjectflow model
dc.subject.classificationEducation--Industrialen_US
dc.subject.classificationEducation--Mathematicsen_US
dc.subject.classificationEngineering--Chemicalen_US
dc.subject.classificationEngineering--Petroleumen_US
dc.titleEmulsion Injection for Enhancing the Fast-and Uniform SAGD Start-up Process
dc.typedoctoral thesis
thesis.degree.disciplineChemical and Petroleum Engineering
thesis.degree.grantorUniversity of Calgary
thesis.degree.nameDoctor of Philosophy (PhD)
ucalgary.item.requestcopytrue
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
ucalgary_2018_yu_long.pdf
Size:
3.95 MB
Format:
Adobe Portable Document Format
Description:
Download
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.74 KB
Format:
Item-specific license agreed upon to submission
Description:
Download
Collections
Open Theses and Dissertations