Vibro-Acoustic Monitoring of Pipeline Leakage and Corrosion

atmire.migration.oldid1336
dc.contributor.advisorPark, Simon
dc.contributor.authorSharma, Vishash
dc.date.accessioned2013-09-13T21:31:49Z
dc.date.available2013-11-12T08:00:13Z
dc.date.issued2013-09-13
dc.date.submitted2013en
dc.description.abstractPipeline networks are economical means of transporting oil and gas. Most pipelines have been designed with a typical life span of 25 to 30 years. Existing pipelines are aging and quite susceptible to failure, due to poor construction of joints, corrosion, fatigue and material cracks. Accidents, terrorist activities, sabotage or theft can also cause leak disasters. Prevention of catastrophic failures of pipelines is critical for public safety and the environment. In order to maintain the healthy state of pipelines, continuous and accurate monitoring of pipelines is crucial, especially for corrosion and leakage. In order to reduce the impact of petroleum product spills, quick and effective leakage detection is needed to mitigate the problem. The focus of this study is the development of a novel pipeline monitoring scheme to detect faults such as corrosion and leakage. Dynamic properties, such as frequency response functions (FRFs) and transient responses, of the pipeline system can change when faults occur. In the case of a corroded pipeline or leaky pipeline system, the mass and stiffness of the pipeline changes, thereby changing the FRFs of the pipeline system. The variation in the dynamic parameters is used to predict the presence of the corrosion or leakage in the pipeline system. Experimental modal analysis was performed using a small-scale pipeline setup in various operating and physical conditions. In parallel, finite element analysis was undertaken for the same physical and operating conditions of the pipeline. A novel adaptive neuro fuzzy inference system (ANFIS) based scheme was developed for pipeline monitoring using fuzzy rules and neural networks. The trained ANFIS architecture was tested with a number of sets of dynamic parameters that were obtained by simulating leakage and corrosion in the pipeline and by varying the pressure and flow rate. The results show that the ANFIS-based pipeline monitoring system can accurately predict the corrosion or leakage in the pipeline with an acceptable band of errors. The predicted results validates that the ANFIS-based pipeline monitoring system is less time-consuming and more flexible through the use of fuzzy rules incorporated with real-world systems.en_US
dc.identifier.citationSharma, V. (2013). Vibro-Acoustic Monitoring of Pipeline Leakage and Corrosion (Master's thesis, University of Calgary, Calgary, Canada). Retrieved from https://prism.ucalgary.ca. doi:10.11575/PRISM/28641en_US
dc.identifier.doihttp://dx.doi.org/10.11575/PRISM/28641
dc.identifier.urihttp://hdl.handle.net/11023/971
dc.language.isoeng
dc.publisher.facultyGraduate Studies
dc.publisher.institutionUniversity of Calgaryen
dc.publisher.placeCalgaryen
dc.rightsUniversity of Calgary graduate students retain copyright ownership and moral rights for their thesis. You may use this material in any way that is permitted by the Copyright Act or through licensing that has been assigned to the document. For uses that are not allowable under copyright legislation or licensing, you are required to seek permission.
dc.subjectMechanical
dc.subject.classificationPipeline,Vibro-acoustic,ANFIS,FE Analysisen_US
dc.titleVibro-Acoustic Monitoring of Pipeline Leakage and Corrosion
dc.typemaster thesis
thesis.degree.disciplineMechanical and Manufacturing Engineering
thesis.degree.grantorUniversity of Calgary
thesis.degree.nameMaster of Science (MSc)
ucalgary.item.requestcopytrue
Files
Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
ucalgary_2013_sharma_vishash.pdf
Size:
1.83 MB
Format:
Adobe Portable Document Format
Description:
License bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
license.txt
Size:
2.65 KB
Format:
Item-specific license agreed upon to submission
Description: