Hydrological Modelling of River Flow Forecasting in Cold Regions and Its Application over the Athabasca River

dc.contributor.advisorHassan, Quazi
dc.contributor.advisorAchari, Gopal
dc.contributor.authorBelvederesi, Chiara
dc.contributor.committeememberRangelova, Elena
dc.contributor.committeememberGupta, Anil
dc.date2023-06
dc.date.accessioned2023-03-24T18:45:50Z
dc.date.available2023-03-24T18:45:50Z
dc.date.issued2023-03-23
dc.description.abstractFloods are disasters that represent a growing threat to the communities living close to rivers. To maximize community resilience, the main objective was to formulate a transferable framework for river flow forecasting in cold and poorly gauged/ungauged regions. First, the literature was reviewed, summarizing the recent findings in river flow forecasting in these regions. Here, hydrological processes greatly vary seasonally and annually, translating into increased model uncertainty. Regionalization, spatial calibration, and other methods were implemented into process-based and empirical models. Although process-based models provided a wide understanding of a watershed’s hydrology, they were often complex and computationally demanding. Empirical models produced fewer calibration parameters although generated biased results when insufficient descriptors were available. The results from this review highlighted some efforts necessary to improve river flow forecasting, including: coping with limited data; providing user-friendly interfaces; advancing model structure; developing a universal method for transferring parameters; standardizing calibration and validation; integrating process-based and empirical models. In addition, a machine learning-based model was developed using a single-input sequential adaptive neuro-fuzzy inference system (ANFIS) in the Athabasca River Basin (ARB) in Alberta, Canada. After estimating the optimal lead time between four hydrometric stations, data measured near the source were used to compute flows near the mouth, over approximately 1,000 km. This technique was compared to nonsequential and multi-input ANFIS, which used data from all the four hydrometric stations. The results showed that sequential ANFIS could accurately predict flows (r2 = 0.99, Nash–Sutcliffe = 0.98) with a longer lead time (6 days) using a single input. Finally, a novel simplistic method for short-term (6 days) forecasting called Flow Difference Model (FDM) was developed and compared against existing hydrological models (i.e., Regression Models (RM) and Base Difference Model (BDM)), to demonstrate that simplistic modelling can achieve acceptable accuracy. The results showed that the FDM outperformed the other models (Nash–Sutcliffe = 0.95) using limited inputs and calibration parameters. Moreover, the FDM had similar performance to machine learning techniques, demonstrating the forecasting capability of simplistic methods. These findings could be utilized towards flood prevention and planning, operations, maintenance, and administration of water resource systems.en_US
dc.identifier.citationBelvederesi, C. (2023). Hydrological modelling of river flow forecasting in cold regions and its application over the Athabasca River (Doctoral thesis, University of Calgary, Calgary, Canada). Retrieved from https://prism.ucalgary.ca.en_US
dc.identifier.urihttp://hdl.handle.net/1880/115958
dc.identifier.urihttps://dx.doi.org/10.11575/PRISM/40807
dc.language.isoengen_US
dc.publisher.facultySchulich School of Engineeringen_US
dc.publisher.institutionUniversity of Calgaryen
dc.rightsUniversity of Calgary graduate students retain copyright ownership and moral rights for their thesis. You may use this material in any way that is permitted by the Copyright Act or through licensing that has been assigned to the document. For uses that are not allowable under copyright legislation or licensing, you are required to seek permission.en_US
dc.subjectungaugeden_US
dc.subjectcold hydrology reviewen_US
dc.subjectempiricalen_US
dc.subjectAthabasca River Basinen_US
dc.subject.classificationEngineeringen_US
dc.subject.classificationEngineering--Environmentalen_US
dc.titleHydrological Modelling of River Flow Forecasting in Cold Regions and Its Application over the Athabasca Riveren_US
dc.typedoctoral thesisen_US
thesis.degree.disciplineEngineering – Civilen_US
thesis.degree.grantorUniversity of Calgaryen_US
thesis.degree.nameDoctor of Philosophy (PhD)en_US
ucalgary.item.requestcopytrueen_US
Files
Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
ucalgary_2023_belvederesi_chiara.pdf
Size:
3.55 MB
Format:
Adobe Portable Document Format
Description:
License bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
license.txt
Size:
2.62 KB
Format:
Item-specific license agreed upon to submission
Description: