Modification of Proton Conducting Metal-Organic Frameworks for Improved Performance in Fuel Cell Applications

atmire.migration.oldid842
dc.contributor.advisorShimizu, George Kisa Hayashi
dc.contributor.authorDawson, Karl William
dc.date.accessioned2013-04-25T15:21:37Z
dc.date.available2013-06-10T07:00:44Z
dc.date.issued2013-04-25
dc.date.submitted2013en
dc.description.abstractThe use of metal-organic frameworks (MOFs) as proton conductors for practical applications is challenging, owing to the difficulties in obtaining a MOF with the desired conductivity levels and stability, and the complications of incorporating a polycrystalline powder into a device. This thesis examines these challenges, and addresses methods that could be used to improve the suitability of MOFs for commercial applications. First, an overview of the difficulties in preparing, measuring, and interpreting the data obtained from alternating current electrochemical impedance spectroscopy of MOFs is presented. Next, an examination of three potential methods of improving the performance of a proton conducting MOF, trisodium 1,3,5-trihydroxy-2,4,6-benzene trisulfonate (Na3Pgs), will be discussed. First, ligand doping of the Na3Pgs system, with 1,3,5 benzenetriphosphonic acid, was performed via a novel isomorphous ligand replacement method. The conductivity increased by an order of magnitude to (2.1 ± 0.5) x 10^-2 S/cm, which is the highest conductivity reported for any MOF system. Secondly, loading heterocycle guests into Na3Pgs improves the conductivity, but controlled loading is a relatively unexplored area, and was examined using Na3Pgs loaded with 1,2,4-triazole (Tz). It was found that Tz is incorporated into the system as the triazolium cation (HTz), giving the general formula [Na(1-x)(HTz)x]3Pgs, and that this kinetically controlled loading is affected by many synthetic parameters, but precise control over such systems is achievable. Finally, as a proof-of-principle, Na3Pgs was mixed with Nafion®, to examine whether a MOF mixed-matrix membrane could be used in a fuel cell. Homogeneous membranes were formed, and conductivity is improved under anhydrous conditions above 150°C, but a more stable MOF is required before commercial applications can be considered.en_US
dc.identifier.citationDawson, K. W. (2013). Modification of Proton Conducting Metal-Organic Frameworks for Improved Performance in Fuel Cell Applications (Doctoral thesis, University of Calgary, Calgary, Canada). Retrieved from https://prism.ucalgary.ca. doi:10.11575/PRISM/26972en_US
dc.identifier.doihttp://dx.doi.org/10.11575/PRISM/26972
dc.identifier.urihttp://hdl.handle.net/11023/620
dc.language.isoeng
dc.publisher.facultyGraduate Studies
dc.publisher.institutionUniversity of Calgaryen
dc.publisher.placeCalgaryen
dc.rightsUniversity of Calgary graduate students retain copyright ownership and moral rights for their thesis. You may use this material in any way that is permitted by the Copyright Act or through licensing that has been assigned to the document. For uses that are not allowable under copyright legislation or licensing, you are required to seek permission.
dc.subjectChemistry--Inorganic
dc.subject.classificationMetal-Organic Frameworken_US
dc.subject.classificationFuel Cellen_US
dc.subject.classificationProton Exchange Membraneen_US
dc.subject.classificationMOFen_US
dc.subject.classificationProton Conductionen_US
dc.subject.classificationAC Impedance Spectroscopyen_US
dc.subject.classificationIsomorphous Ligand Replacementen_US
dc.subject.classificationPore Loadingen_US
dc.subject.classificationMixed Matrix Membraneen_US
dc.titleModification of Proton Conducting Metal-Organic Frameworks for Improved Performance in Fuel Cell Applications
dc.typedoctoral thesis
thesis.degree.disciplineChemistry
thesis.degree.grantorUniversity of Calgary
thesis.degree.nameDoctor of Philosophy (PhD)
ucalgary.item.requestcopytrue
Files
Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
ucalgary_2013_dawson_karl.pdf
Size:
17.3 MB
Format:
Adobe Portable Document Format
Description:
License bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
license.txt
Size:
2.65 KB
Format:
Item-specific license agreed upon to submission
Description: