Modeling and Evaluation of Wind Turbine Operational Strategies During Icing Events
| dc.contributor.advisor | Sun, Qiao | |
| dc.contributor.author | Hildebrandt, Shannon | |
| dc.contributor.committeemember | Nowicki, Edwin Peter | |
| dc.contributor.committeemember | Morton, Chris R. | |
| dc.contributor.committeemember | Wood, David H. | |
| dc.date | 2019-06 | |
| dc.date.accessioned | 2019-01-14T22:41:05Z | |
| dc.date.available | 2019-01-14T22:41:05Z | |
| dc.date.issued | 2019-01-10 | |
| dc.description.abstract | Cold climates around the world are seeing increasing investment in wind power generation. The benefits of cold regions, however, come with unique challenges that are not experienced by wind turbines in more temperate regions. The accumulation of ice on wind turbine blades in particular can reduce power production due to aerodynamic inefficiencies and turbine shutdowns. To gain a better understanding of the extent to which these challenges are faced across Canada, the author ran a Survey in 2017 of 43 wind farms across the country. Results were presented at the 2018 CanWEA O&M Summit, and discussions that followed highlighted an important and unanswered question: When an icing event is detected or predicted at a wind farm, is it better to pause the turbines during the event or maintain power production? How much less ice is accumulated if the wind turbines are paused, and how does this impact power production? To answer these questions, the Ice and Power Model described herein was developed. Wind turbine characteristics and icing event conditions are taken as inputs, and blade ice accumulation, aerodynamic impacts, and power production impacts are produced as outputs. The model consists of three components: (1) ice accumulation, (2) aerodynamic analysis, and (3) power curve estimation. Upon validation, the model was used to estimate and analyze the blade ice accumulation on the NREL 1.5 MW reference wind turbine for five icing events, in which the input parameters of far-field wind speed, air temperature, cloud liquid water content, and droplet mean volume diameter were varied. For each icing event, two simulations were executed with the model where: (a) the wind turbine maintains operation during the icing event and (b) the wind turbine is paused for the duration of the icing event. The resulting ice accumulation, impacts to blade aerodynamics, and impacts to power production capabilities following the icing event were compared. The results provide evidence that while pausing turbines does indeed result in significantly less ice accumulation, the impact to power production capabilities following the icing event is not significant enough to justify cutting power production to zero for short events. | en_US |
| dc.identifier.citation | Hildebrandt, S. (2019). Modeling and Evaluation of Wind Turbine Operational Strategies During Icing Events (Master's thesis, University of Calgary, Calgary, Canada). Retrieved from https://prism.ucalgary.ca. | en_US |
| dc.identifier.doi | http://dx.doi.org/10.11575/PRISM/35718 | |
| dc.identifier.uri | http://hdl.handle.net/1880/109455 | |
| dc.language.iso | en | en_US |
| dc.publisher.faculty | Schulich School of Engineering | en_US |
| dc.publisher.institution | University of Calgary | en |
| dc.rights | University of Calgary graduate students retain copyright ownership and moral rights for their thesis. You may use this material in any way that is permitted by the Copyright Act or through licensing that has been assigned to the document. For uses that are not allowable under copyright legislation or licensing, you are required to seek permission. | en_US |
| dc.subject | Wind Energy | en_US |
| dc.subject | Cold Climates | en_US |
| dc.subject | Operations and Maintenance | en_US |
| dc.subject | Wind Turbine | en_US |
| dc.subject | Renewable Energy | en_US |
| dc.subject.classification | Energy | en_US |
| dc.subject.classification | Engineering--Mechanical | en_US |
| dc.title | Modeling and Evaluation of Wind Turbine Operational Strategies During Icing Events | en_US |
| dc.type | master thesis | en_US |
| thesis.degree.discipline | Engineering – Mechanical & Manufacturing | en_US |
| thesis.degree.grantor | University of Calgary | en_US |
| thesis.degree.name | Master of Science (MSc) | en_US |
| ucalgary.item.requestcopy | true |