GaN Monolithic Microwave Integrated Amplifiers for Space and Wireless Applications

dc.contributor.advisorGhannouchi, Fadhel M.
dc.contributor.authorAbounemra, Ahmed Mohammed Elelimy Ramadan
dc.contributor.committeememberBelostotski, Leonid
dc.contributor.committeememberEl-Sheimy, Naser
dc.contributor.committeememberHelaoui, Mohamed
dc.contributor.committeememberBensmida, Souheil
dc.date2021-02
dc.date.accessioned2021-01-11T19:46:07Z
dc.date.available2021-01-11T19:46:07Z
dc.date.issued2021-01-05
dc.description.abstractIn modern communication systems, such as the fourth-generation (4G) and fifth-generation (5G), the frequency spectrum needs to be fully utilized to support broadband applications and keep up with increasing user demand for high data rates. As an important component of the RF front-end in the transmitter, the power amplifier (PA) is used to convert the DC supply power into RF power. As the PA consumes most of the power in the transmitter, minimizing the power dissipation of the PA would have a significant effect on the efficiency of the whole transceiver. Doherty power amplifiers (DPAs) based on gallium nitride (GaN) transistors are poised to play a leading role in wireless base stations and repeaters in achieving high power efficiency and in meeting the linearity requirements set by wireless network standards. Although DPAs are widely utilized in field-deployed 4G base stations, they still suffer from many limitations. These limitations are mainly related to hardware imperfections in the RF blocks of the Doherty PA, such as narrow bandwidth and the gain imbalance between the main and the peak branches. Also, the large size of the circuit, because of the use of λ/4 transformers in the output combining network, is considered a critical problem for broadband DPA design. To adequately overcome the limitations of the Doherty PA, a new design methodology for Doherty architecture based on three-port input and output networks topology is proposed in the first part of this thesis. The output three-port network performs the impedance matching from any load impedance to the optimum loads, for both main and peak transistors and combines the power delivered from the two devices at any power ratio. The input splitting network is proposed for matching the input impedances of the two transistors to the source impedance. The freedom in choosing the power division ratio of the input network, enables us to achieve a tradeoff between efficiency and linearity. An asymmetric two-stage broadband Doherty amplifier is implemented using a 0.25-um GaN HEMT MMIC process to validate the proposed topology. The second part of the thesis concerns the study and the design of a wide-band harmonic controlling network (HCN) based DPA, using a new output combining network to achieve higher power efficiency over the broadband operating frequency range. In this design, the frequency sensitivity of the impedance inverters was compensated to minimize the efficiency degradation across the designed bandwidth. In many microwave systems, like radar and satellite applications, unwanted high input power levels such as jamming and interfering signals, affect LNAs. One of the characteristics of LNAs, designed using GaN technology, is the ability to endure these power levels with no need for using a limiter in front of the LNA. The third part of this dissertation presents a survivability study of wideband GaN HEMT LNA. It was concluded that GaN LNA can sustain relatively very high input power overdrive before device performance degradation or failure.en_US
dc.identifier.citationAbounemra, A. M. E. R. (2021). GaN Monolithic Microwave Integrated Amplifiers for Space and Wireless Applications (Doctoral thesis, University of Calgary, Calgary, Canada). Retrieved from https://prism.ucalgary.ca.en_US
dc.identifier.doihttp://dx.doi.org/10.11575/PRISM/38542
dc.identifier.urihttp://hdl.handle.net/1880/112961
dc.language.isoengen_US
dc.publisher.facultySchulich School of Engineeringen_US
dc.publisher.institutionUniversity of Calgaryen
dc.rightsUniversity of Calgary graduate students retain copyright ownership and moral rights for their thesis. You may use this material in any way that is permitted by the Copyright Act or through licensing that has been assigned to the document. For uses that are not allowable under copyright legislation or licensing, you are required to seek permission.en_US
dc.subjectBroadband Doherty power amplifieren_US
dc.subjectHarmonic controlling networken_US
dc.subjectHigh efficiencyen_US
dc.subjectWide-band low noise amplifieren_US
dc.subjectSurvivabilityen_US
dc.subject.classificationEngineering--Electronics and Electricalen_US
dc.titleGaN Monolithic Microwave Integrated Amplifiers for Space and Wireless Applicationsen_US
dc.typedoctoral thesisen_US
thesis.degree.disciplineEngineering – Electrical & Computeren_US
thesis.degree.grantorUniversity of Calgaryen_US
thesis.degree.nameDoctor of Philosophy (PhD)en_US
ucalgary.item.requestcopytrueen_US
Files
Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
ucalgary_2021_abounemra_ahmed.pdf
Size:
7.75 MB
Format:
Adobe Portable Document Format
Description:
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
2.62 KB
Format:
Item-specific license agreed upon to submission
Description: