Geochemical and Petrophysical Characterization of Canadian Low-Permeability Oil and Liquid-Rich Gas Reservoirs using Drill Cuttings
| dc.contributor.advisor | Clarkson, Christopher R. | |
| dc.contributor.author | Yang, Zhengru | |
| dc.contributor.committeemember | Spencer, Ronald J. | |
| dc.contributor.committeemember | Tutolo, Benjamin M. | |
| dc.date | 2021-02 | |
| dc.date.accessioned | 2021-01-05T16:20:59Z | |
| dc.date.available | 2021-01-05T16:20:59Z | |
| dc.date.issued | 2020-12-16 | |
| dc.description.abstract | Significant technology development has aided gas and oil production from Canadian ultra-low permeability (unconventional) reservoirs during the past twenty years. Multi-fractured horizontal wells (MFHWs) in particular have enabled commercial production from these reservoirs. However, hydraulic fracturing in MFHWs is commonly performed without consideration for reservoir quality variability along the lateral section of MFHWs. Identification of “sweet spots” along the lateral can help to target hydraulic fracture stages. Drill cuttings are, however, often the only reservoir samples collected from MFHWs. This thesis addresses the limitations of the currently available drill cuttings characterization techniques, and proposes new methods to estimate geochemical and petrophysical properties from this sample type. A predictive algorithm is developed for quantification of mineralogical composition from elemental data obtained using portable energy dispersive X-ray fluorescence (pXRF) and inductively coupled plasma mass spectrometry (ICP-MS) techniques. The development of this technique allows operators to acquire high-resolution mineralogical compositions along the length of MFHWs by conducting inexpensive, time-efficient, non-destructive elemental analysis. Another important contribution of this thesis is the establishment of an integrated experimental and modeling approach to estimate surface diffusion coefficients and permeability of porous media, including synthetic porous materials and drill cuttings collected from unconventional reservoirs. Currently, the commonly-used empirical methods for estimation of surface diffusion cannot incorporate the complexity of rock fabrics in unconventional reservoirs. To address this limitation, in this thesis, surface diffusion coefficients of the gas/solid system are estimated by history-matching adsorption rate data collected on small amounts of porous materials using a newly-developed rate-of-adsorption (ROA) model. Simulation results demonstrate the importance of surface diffusion under the applied experimental conditions. Finally, the impact of organic matter on 1) matrix permeability and 2) gas transport properties in macro-/meso-/micropores of Duvernay shale samples is investigated. The proposed ROA model is applied to 1) extract gas (N2/CO2) apparent permeability, and 2) investigate gas transport mechanisms. The evolution of pore attributes, permeability and flow regimes of shale samples are determined by subjecting shale samples to an Extended Slow Heating (ESH) Rock-Eval thermal treatment and measuring the properties after each treatment stage. | en_US |
| dc.identifier.citation | Yang, Z. (2020). Geochemical and Petrophysical Characterization of Canadian Low-Permeability Oil and Liquid-Rich Gas Reservoirs using Drill Cuttings (Master's thesis, University of Calgary, Calgary, Canada). Retrieved from https://prism.ucalgary.ca. | en_US |
| dc.identifier.doi | http://dx.doi.org/10.11575/PRISM/38504 | |
| dc.identifier.uri | http://hdl.handle.net/1880/112912 | |
| dc.language.iso | eng | en_US |
| dc.publisher.faculty | Science | en_US |
| dc.publisher.institution | University of Calgary | en |
| dc.rights | University of Calgary graduate students retain copyright ownership and moral rights for their thesis. You may use this material in any way that is permitted by the Copyright Act or through licensing that has been assigned to the document. For uses that are not allowable under copyright legislation or licensing, you are required to seek permission. | en_US |
| dc.subject | drill cuttings; portable/handheld XRF; ICP-MS; surface diffusion; apparent gas permeability; adsorption; Duvernay; Montney; Bakken | en_US |
| dc.subject.classification | Geology | en_US |
| dc.subject.classification | Engineering--Petroleum | en_US |
| dc.title | Geochemical and Petrophysical Characterization of Canadian Low-Permeability Oil and Liquid-Rich Gas Reservoirs using Drill Cuttings | en_US |
| dc.type | master thesis | en_US |
| thesis.degree.discipline | Geoscience | en_US |
| thesis.degree.grantor | University of Calgary | en_US |
| thesis.degree.name | Master of Science (MSc) | en_US |
| ucalgary.item.requestcopy | true | en_US |