A Robust Kinetic Model for Computer Modelling of In Situ Combustion Processes in Athabasca Oil Sands

Simple item page
dc.contributor.advisorMehta, Sudarshan A.
dc.contributor.advisorMoore, Robert Gordon
dc.contributor.authorAlizadeh, Ahmad
dc.contributor.committeememberBelgrave, John D. M.
dc.contributor.committeememberHarding, Thomas Grant
dc.date2020-11
dc.date.accessioned2020-07-10T14:27:38Z
dc.date.available2020-07-10T14:27:38Z
dc.date.issued2020-07-07
dc.description.abstractIn situ combustion (ISC) enhanced oil recovery is one of the most theoretically attractive thermal recovery techniques. This method is comparable with steam-based processes while it has a higher thermal efficiency and a lower environmental footprint. However, ISC is notorious for being less successful during field operations as it is substantially more complex than steam methods. This has eventually motivated the operating companies to opt for steam injection over this recovery technique. One major and persisting complexity of ISC is understanding the chemical reactions that occur during this process and proper definition of kinetic models. In general, kinetic models specify reactions that take place between the injected oxygen and the reservoir hydrocarbons. A good kinetic model should capture the principal reactions of this dynamic process and describe the process mechanism. At the same time, and for modelling purposes, it must avoid putting a huge computational burden on simulation engines so that they can handle the great deal of coupling between the fluid flow, heat transfer, and reaction kinetics appropriately. The principal objective of this research was to develop a comprehensive kinetic model for ISC applications in Athabasca oil sands. The research began with the fluid characterization of Athabasca bitumen, having the ISC mechanism and kinetics in mind. Then, the development stage of the kinetic model was started by history matching of some basic LTO and thermal cracking experiments. In the next stage, and as the main body of this research, the developed kinetic model was tuned by using 27 ramped temperature oxidation (RTO) experiments at a wide range of operating conditions. And as the final stage, the developed model was successfully evaluated over three different modes of combustion tube (CT) experiments. The outcome of this research is a demanded kinetic model which is vigorously validated on the broadest range of operating conditions to date. It can considerably reduce the number of required laboratory experiments and help with more accurate screening of potential ISC reservoirs. Finally, the procedure introduced in this research will be extremely helpful for development of kinetic models for other oil types.en_US
dc.identifier.citationAlizadeh, A. (2020). A Robust Kinetic Model for Computer Modelling of In Situ Combustion Processes in Athabasca (Doctoral thesis, University of Calgary, Calgary, Canada). Retrieved from https://prism.ucalgary.ca.en_US
dc.identifier.doihttp://dx.doi.org/10.11575/PRISM/37996
dc.identifier.urihttp://hdl.handle.net/1880/112274
dc.language.isoengen_US
dc.publisher.facultySchulich School of Engineeringen_US
dc.publisher.institutionUniversity of Calgaryen
dc.rightsUniversity of Calgary graduate students retain copyright ownership and moral rights for their thesis. You may use this material in any way that is permitted by the Copyright Act or through licensing that has been assigned to the document. For uses that are not allowable under copyright legislation or licensing, you are required to seek permission.en_US
dc.subjectEnhanced Oil Recoveryen_US
dc.subjectIn Situ Combustionen_US
dc.subjectThermal Recoveryen_US
dc.subjectComputer Modellingen_US
dc.subject.classificationEnergyen_US
dc.subject.classificationEngineeringen_US
dc.subject.classificationEngineering--Petroleumen_US
dc.titleA Robust Kinetic Model for Computer Modelling of In Situ Combustion Processes in Athabasca Oil Sandsen_US
dc.typedoctoral thesisen_US
thesis.degree.disciplineEngineering – Chemical & Petroleumen_US
thesis.degree.grantorUniversity of Calgaryen_US
thesis.degree.nameDoctor of Philosophy (PhD)en_US
ucalgary.item.requestcopytrueen_US
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
ucalgary_2020_alizadeh_ahmad.pdf
Size:
19.07 MB
Format:
Adobe Portable Document Format
Description:
Download
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
2.62 KB
Format:
Item-specific license agreed upon to submission
Description:
Download
Collections
Open Theses and Dissertations