Tracking Thermal and Structural Properties of Melt-Freeze Crusts in the Seasonal Snowpack

atmire.migration.oldid2219
dc.contributor.advisorJamieson, Bruce
dc.contributor.authorSmith, Michael Andrew
dc.date.accessioned2014-06-05T17:40:26Z
dc.date.available2014-11-17T08:00:31Z
dc.date.issued2014-06-05
dc.date.submitted2014en
dc.description.abstractPersistent weak layers present a particular challenge for avalanche forecasters due to their long lifetime and the difficulty of obtaining observations once they are deeply buried. Melt-freeze crusts are one type of persistent weak layer that is often associated with deep slab avalanches during late winter or spring. This study seeks to improve the understanding of the thermal and structural properties of melt-freeze crusts by tracking them from formation through to isothermal conditions in the spring. Specific Surface Area (SSA) was tracked weekly using near-infrared digital photography for nine natural crusts and four cold lab crusts during the winters of 2008-09 and 2009-10. Image analysis techniques were adapted from existing methods in order to track the mean SSA for specific structures within crusts, as well as vertical profiles of SSA across crust boundaries. Few temporal trends were identified even in the presence of strong diurnal slope normal temperature gradients, but the ratio of mean SSA between crusts and adjacent layers did reveal relative changes in the structure. The thermal conductivity was tracked for six natural and five cold lab crusts during the winter of 2009-10 using a heated needle probe. Thermal conductivity of two cold lab crusts increased during freezing and subsequently decreased in the presence of strong vertical temperature gradients, while that of natural crusts had no discernible trends under weak temperature gradients. Trends of increasing thermal conductivity in adjacent layers were well correlated with increasing density as in previous studies but with a positive offset that may be attributable to the warmer snow temperatures in this study relative to past studies. The SNOWPACK model was used to model the formation and evolution of spatially uniform crusts at a flat study plot as well as on a virtual slope. Persistent model cold temperature biases were found on the virtual slope, which resulted in delays in settling and densification relative to observations. A warm model bias was found for the flat simulation,and settling and layer water content exceeded what was observed. Both biases were likely related to meteorological inputs.en_US
dc.identifier.citationSmith, M. A. (2014). Tracking Thermal and Structural Properties of Melt-Freeze Crusts in the Seasonal Snowpack (Doctoral thesis, University of Calgary, Calgary, Canada). Retrieved from https://prism.ucalgary.ca. doi:10.11575/PRISM/28497en_US
dc.identifier.doihttp://dx.doi.org/10.11575/PRISM/28497
dc.identifier.urihttp://hdl.handle.net/11023/1566
dc.language.isoeng
dc.publisher.facultyGraduate Studies
dc.publisher.institutionUniversity of Calgaryen
dc.publisher.placeCalgaryen
dc.rightsUniversity of Calgary graduate students retain copyright ownership and moral rights for their thesis. You may use this material in any way that is permitted by the Copyright Act or through licensing that has been assigned to the document. For uses that are not allowable under copyright legislation or licensing, you are required to seek permission.
dc.subjectAtmospheric Sciences
dc.subjectGeophysics
dc.subjectEngineering--Civil
dc.subject.classificationSnowen_US
dc.subject.classificationavalancheen_US
dc.subject.classificationsnowpacken_US
dc.subject.classificationthermal conductivityen_US
dc.subject.classificationspecific surface areaen_US
dc.titleTracking Thermal and Structural Properties of Melt-Freeze Crusts in the Seasonal Snowpack
dc.typedoctoral thesis
thesis.degree.disciplineCivil Engineering
thesis.degree.grantorUniversity of Calgary
thesis.degree.nameDoctor of Philosophy (PhD)
ucalgary.item.requestcopytrue
Files
Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
ucalgary_2014_smith_michael.pdf
Size:
6.02 MB
Format:
Adobe Portable Document Format
Description:
License bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
license.txt
Size:
2.65 KB
Format:
Item-specific license agreed upon to submission
Description: