IMU design for high vibration environments with special consideration for vibration rectification
| atmire.migration.oldid | 233 | |
| dc.contributor.advisor | Spiewak, Swavik | |
| dc.contributor.author | Zaiss, Curtis | |
| dc.date.accessioned | 2012-08-27T23:28:45Z | |
| dc.date.available | 2012-11-13T08:01:21Z | |
| dc.date.issued | 2012-08-27 | |
| dc.date.submitted | 2012 | en |
| dc.description.abstract | Inertial measurement units (IMU)s have been in use for decades. When first developed the uses were usually limited to space travel and military applications. With the development of new technologies and new sensors IMUs are being used in many more applications like street mapping, airborne surveying, down-hole logging and directional drilling, unmanned vehicles, and even in smart phones. The variety of applications has lent itself to a wide variety of sensors being developed with costs ranging from a few dollars to few thousand dollars. While the development of these sensors and IMUs has led to more widespread uses and a general improvement in the performance to cost ratio, there has remained a gap in understanding of the effects of vibration on the accuracy of the system. The result of this gap is poor performance under vibration. Both the designer and user must be made aware of the vibration related errors to avoid them. This thesis explores the effects of nonlinearity, system noise, computational error, filtering, and system dynamics with the goal of providing an understanding of the errors and their interactions when subjected to vibration or high dynamics. By providing methods of analyzing and in many cases compensating for errors, it is possible to design a more robust system. | en_US |
| dc.identifier.citation | Zaiss, C. (2012). IMU design for high vibration environments with special consideration for vibration rectification (Master's thesis, University of Calgary, Calgary, Canada). Retrieved from https://prism.ucalgary.ca. doi:10.11575/PRISM/26496 | en_US |
| dc.identifier.doi | http://dx.doi.org/10.11575/PRISM/26496 | |
| dc.identifier.uri | http://hdl.handle.net/11023/161 | |
| dc.language.iso | eng | |
| dc.publisher.faculty | Graduate Studies | |
| dc.publisher.institution | University of Calgary | en |
| dc.publisher.place | Calgary | en |
| dc.rights | University of Calgary graduate students retain copyright ownership and moral rights for their thesis. You may use this material in any way that is permitted by the Copyright Act or through licensing that has been assigned to the document. For uses that are not allowable under copyright legislation or licensing, you are required to seek permission. | |
| dc.subject | Engineering--Mechanical | |
| dc.subject.classification | vibration rectification | en_US |
| dc.subject.classification | inertial | en_US |
| dc.subject.classification | IMU | en_US |
| dc.title | IMU design for high vibration environments with special consideration for vibration rectification | |
| dc.type | master thesis | |
| thesis.degree.discipline | Mechanical and Manufacturing Engineering | |
| thesis.degree.grantor | University of Calgary | |
| thesis.degree.name | Master of Science (MSc) | |
| ucalgary.item.requestcopy | true |